Skip to product information
1 of 1

Guest Farmhouse Silicone Soap Mold

Guest Farmhouse Silicone Soap Mold

Regular price $20.70 CAD
Regular price Sale price $20.70 CAD
Sale Sold out
Shipping calculated at checkout.

Rustic and Old Fashioned, the Guest Farmhouse Silicone Soap Mold from Crafter's Choice is a classic design that is sure to remind of days gone by. The deep rectangle shape of the bar comes complete with ridges that will give a wonderful texture to all your soap and lotion bars!

Usage Guidelines

Rustic and Old Fashioned, the Guest Farmhouse Silicone Soap Mold from Crafter's Choice is a classic design that is sure to remind of days gone by. The ridges of the bar will give a wonderful texture to all your soap and lotion bars!

Material: Food Grade SiliconeMaximum Product Pour Temp: 500ºFMakes (8) Soap Bars

Technical Information

Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.Care: Hand wash in warm sudsy water.

Makes (8) 1.2 oz Soap BarsLength: 2"Width: 1.5"Depth: 0.75"

Documentation & Resources

View full details

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Judy The Crazy Soap Lady
Such a cute soap mold!

This mold makes such cute soaps - great for airbnb's or a powder room. You need to use sodium lactate for the bars to harden or else they need to stay in the mold longer than usual. But well worth the wait!