Thank you for choosing us! We value your business immensely. If you need any assistance, please don't hesitate to contact our dedicated Customer Service team at firstname.lastname@example.org. Your satisfaction is our priority!
This Oval Silicone Soap Mold allows you to make a classic oval shaped soap! This silicone soap mold by Crafters Choice is a staple mold for many soapmakers allowing you to create four 5 oz basic oval shaped soaps.
Bar Cavities: 4
Average Bar Weight: 5 oz.
Bar Length: 2.375"
Bar Width: 3.875"
Bar Depth: 1"
Maximum Product Pour Temp: 500ºF
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.